Home > exterior plastic wall cladding > linea weatherboard specifications

linea weatherboard specifications

Linea™ Weatherboard | James Hardie

Linea Weatherboard ™ can be used to create colourful feature walls, full cladding for new builds and cladding for additions and renovations. With Linea Weatherboard your home can have all the distinctive features and charm of weatherboard with all the benefits of low maintenance, Seven Trust fibre cement.

Technical Specification - Selector

Linea Weatherboard cladding is suitable for use in all wind zones as defined in NZS 3604 and is also suitable for use in SED wind pressures up to 2.5kPa (ULS). For wind pressures higher than those mentioned above, contact James Hardie at 0800 808 868 for assistance. 2.8 STRUCTURAL BRACING Linea Weatherboard direct fixed installed as per Linea

LINEA™ WEATHERBOARD DIRECT FIXED CLADDING

1.1 Linea™ Weatherboard is a bevel-back fibre cement weatherboard, which is designed to be used as part of an external wall cladding system for residential and light commercial type buildings where domestic construction techniques are used. 1.2 Linea™ Weatherboard Direct Fixed Cladding consists of Linea™ Weatherboards applied direct

Linea Weatherboard from James Hardie Australia

Linea™ is a deep shadow weatherboard by James Hardie for contemporary homes. They are ideal cladding boards when the charm of a deep shadow weatherboard is required without the maintenance of

Technical Specification

For use of Linea Weatherboard outside this published scope, the architect, designer or engineer must undertake specific design. For advice on designs outside the scope of this specification, Ask James Hardie on 0800 808 868. 2 Design 2.1 COMPLIANCE Linea Weatherboard direct fixed and cavity cladding

Vertical Installation Technical Specification

Linea® Oblique Weatherboard installed as per this specification gives a vertical rusticated profile weatherboard appearance. Linea Oblique Weatherboard can be fixed to timber-framed external walls. A wide range of colours can be used, varying from light to dark. Linea Oblique Weatherboard is available in 200mm

Linea Weatherboard - jameshardie.com.au

Innovative and durable, Linea weatherboards are resistant to shrinking, swelling and cracking and will hold paint longer than wood. Featuring the distinctive charm of a deep shadow weatherboard without the maintenance of timber, the unmatched thickness for fibre cement weatherboards of 16mm which also enable handy tongue and groove short ends

Linea Weatherboard - James Hardie Industries

Innovative and durable, Linea weatherboards are resistant to shrinking, swelling and cracking and will hold paint longer than wood. Featuring the distinctive charm of a deep shadow weatherboard without the maintenance of timber, the unmatched thickness for fibre cement weatherboards of 16mm which also enable handy tongue and groove short ends

Linea™ Weatherboard Cavity Cladding | BRANZ

Linea™ Weatherboard Cavity Cladding is a cavity-based bevel-back fibre-cement weatherboard wall cladding. It is designed to be used as part of an external cladding system for residential and light commercial type buildings where domestic construction techniques are used.

TECHNICAL LITERATURE | James Hardie

1. Linea Weatherboard Cavity Fix Technical Specification 2. Linea Weatherboard Direct Fix Technical Specification 3. Linea Weatherboard Technical Supplement Fixing To Brick Veneer Framing 4. Codemark Linea Weatherboard 5. BRANZ Appraisal Linea Weatherboard Cavity Cladding 6. BRANZ Appraisal Linea Weatherboard Direct Fixed Cladding

Technical Specification

For use of Linea Weatherboard outside this published scope, the architect, designer or engineer must undertake specific design. For advice on designs outside the scope of this specification, Ask James Hardie on 0800 808 868. 2 Design 2.1 COMPLIANCE Linea Weatherboard direct fixed and cavity cladding

LINEA™ WEATHERBOARD DIRECT FIXED CLADDING

1.1 Linea™ Weatherboard is a bevel-back fibre cement weatherboard, which is designed to be used as part of an external wall cladding system for residential and light commercial type buildings where domestic construction techniques are used. 1.2 Linea™ Weatherboard Direct Fixed Cladding consists of Linea™ Weatherboards applied direct

Linea™ Weatherboard - Productspec

Linea Weatherboard provides traditional weatherboard look with deep shadow lines that create a modern or classic architecture. A 16mm thick bevel backed, tongue and groove jointed, pre-primed manila white board, Linea Weatherboard is both tough and beautiful.

Vertical Installation Technical Specification

Linea® Oblique Weatherboard installed as per this specification gives a vertical rusticated profile weatherboard appearance. Linea Oblique Weatherboard can be fixed to timber-framed external walls. A wide range of colours can be used, varying from light to dark. Linea Oblique Weatherboard is available in 200mm

What is linea board?

Linea™ Weatherboard is a 16mm thick, the manufacturer specifications give a minimum overlap of 25mm, therefore the coverage for each board is 145mm.

Linea Weatherboard - jameshardie.com.au

Innovative and durable, Linea weatherboards are resistant to shrinking, swelling and cracking and will hold paint longer than wood. Featuring the distinctive charm of a deep shadow weatherboard without the maintenance of timber, the unmatched thickness for fibre cement weatherboards of 16mm which also enable handy tongue and groove short ends

James Hardie 4200 x 180 x 16mm Scyon Linea Fibre Cement

James Hardie's Scyon Linea are an enduring weatherboard for beach houses, Hamptons homes, country cottages and modern masterpieces. With these weatherboards your home can have the distinctive charm of a traditional thick timber weatherboard without requiring frequent repainting. Unlike traditional timber, fibre cement weatherboards are stable.

Linea™ Weatherboard Direct Fixed Cladding | BRANZ

Linea™ Weatherboard Direct Fixed Cladding consists of Linea™ Weatherboards applied direct to the external wall framing over a building underlay. The cladding incorporates secondary seals behind all internal and external corners, flashings for window, door and meter box penetrations, as well as air seals to all wall penetrations.

Linea Weatherboard with Gecko Gauge Installation - YouTube

How to video to install Linea Weatherboard using the Gecko Gauge with the best tips and tricks included. Always refer to the Linea Weatherboard Technical Spe

Fibre Cement - PlaceMakers

Linea Oblique Weatherboard is a modern, rusticated weatherboard profile that can be installed both horizontally and vertically. It’s available in 200 and 300mm widths allowing you to create both modern and traditional designs, or try combining the two widths to create an architectural look that’s truly unique.

Linea™ Weatherboard - Productspec

Linea Weatherboard provides traditional weatherboard look with deep shadow lines that create a modern or classic architecture. A 16mm thick bevel backed, tongue and groove jointed, pre-primed manila white board, Linea Weatherboard is both tough and beautiful.

Vertical Installation Technical Specification

Linea® Oblique Weatherboard installed as per this specification gives a vertical rusticated profile weatherboard appearance. Linea Oblique Weatherboard can be fixed to timber-framed external walls. A wide range of colours can be used, varying from light to dark. Linea Oblique Weatherboard is available in 200mm

James Hardie Linea™ Weatherboard Direct Fixed and Cavity

3. LineaTM Weatherboard cladding is finished with a latex paint system. Product purpose and use 1.0 Material Cladding for the Direct Fixed Wall Construction Method: 1.1 LineaTM Weatherboard Direct Fixed Cladding has been assessed as an external wall cladding for buildings within the following scope:

James Hardie Linea® Weatherboard Direct Fixed and Cavity

Linea® Weatherboard is a 16 mm thick bevelback fibre cement weatherboard, which is designed to be used as part of an external wall cladding system for residential and light commercial type buildings where domestic construction techniques

Trim Installation Instructions - Johns Building Supplies

Scyon Linea weatherboard and Scyon ™Axent Trim are manufactured to AS/NZS 2908.2 ‘Cellulose-Cement Products Part 2: Flat Sheets’. Scyon Linea weatherboard and Scyon ™Axent Trim are classified Type A, Category 3 in accordance with AS/NZS 2908.2. For Material Safety Data Sheets (MSDS) visit www.jameshardie.com.au or Ask James Hardie™ on

Linea weatherboard Cladding 150mm and 180mm for external

Innovative and durable, Linea weatherboards are resistant to shrinking, swelling and cracking and will hold paint longer than wood. Featuring the distinctive charm of a deep shadow weatherboard without the maintenance of timber, the unmatched thickness for fibre cement weatherboards of 16mm which also enable handy tongue and groove short ends

James Hardie Scyon Linea Weatherboard - Megatimber

James Hardie Scyon Linea Weatherboard. James Hardie's Scyon Linea are an enduring weatherboard for beach houses, Hamptons homes, country cottages and modern masterpieces. . With these weatherboards your home can have the distinctive charm of a traditional thick timber weatherboard without requiring frequent repain

Resene Linea Paint Warranty

The LINEA® Weatherboard and CLD Trim must be dry before painting. Punch and fill all exposed nails a maximum of 2mm below the surface. Fill the hole with an approved exterior filler that is compatible with LINEA® board, allow to cure and sand smooth ready for priming. Prime the filled holes in accordance with paint manufacturer’s

Linea Weatherboard with Gecko Gauge Installation - YouTube

How to video to install Linea Weatherboard using the Gecko Gauge with the best tips and tricks included. Always refer to the Linea Weatherboard Technical Spe

Fibre Cement - PlaceMakers

Linea Oblique Weatherboard is a modern, rusticated weatherboard profile that can be installed both horizontally and vertically. It’s available in 200 and 300mm widths allowing you to create both modern and traditional designs, or try combining the two widths to create an architectural look that’s truly unique.

James Hardie Linea™ Weatherboard Direct Fixed and Cavity

3. LineaTM Weatherboard cladding is finished with a latex paint system. Product purpose and use 1.0 Material Cladding for the Direct Fixed Wall Construction Method: 1.1 LineaTM Weatherboard Direct Fixed Cladding has been assessed as an external wall cladding for buildings within the following scope:

James Hardie Linea® Weatherboard Direct Fixed and Cavity

Linea® Weatherboard is a 16 mm thick bevelback fibre cement weatherboard, which is designed to be used as part of an external wall cladding system for residential and light commercial type buildings where domestic construction techniques

Product Catalogue

WEATHERBOARDS James Hardie Product Catalogue Linea™ PVC Starter Strip A perforated PVC starter strip used to set out the bottom edge of Scyon™ Linea™ weatherboard at the correct angle. Length: 3,000mm Selling Unit: 25 per pack HardieDrive™ Screws 32mm long A class 3 finish self-tapping wing-tipped screw for fastening to 0.8mm to 1.6mm BMT

Linea weatherboard Cladding 150mm and 180mm for external

Innovative and durable, Linea weatherboards are resistant to shrinking, swelling and cracking and will hold paint longer than wood. Featuring the distinctive charm of a deep shadow weatherboard without the maintenance of timber, the unmatched thickness for fibre cement weatherboards of 16mm which also enable handy tongue and groove short ends

James Hardie Scyon Linea Weatherboard - Megatimber

James Hardie Scyon Linea Weatherboard. James Hardie's Scyon Linea are an enduring weatherboard for beach houses, Hamptons homes, country cottages and modern masterpieces. . With these weatherboards your home can have the distinctive charm of a traditional thick timber weatherboard without requiring frequent repain

Linea™ Smooth Weatherboard James Hardie – PlastaMasta Gold

Innovative and durable, Linea weatherboards are resistant to shrinking, swelling and cracking and will hold paint longer than wood. Featuring the distinctive charm of a deep shadow weatherboard without the maintenance of timber, the unmatched thickness for fibre cement weatherboards of 16mm which also enable handy tongue and groove short ends

Weatherboard Fibre Cement - ADX Architectural - James Hardie

Explore the James Hardie range of Weatherboard Fibre Cement products & accessories to achieve clean lines and texture on exterior applications.

Dwelling Well

Exterior Cladding. Weatherboard with a slimline box corner James Hardie – Linea Weatherboards. The advanced composite structure of Linea Weatherboard also means the boards are resistant to fire, moisture damage and rot, so you can rest assured your home will be tough, as well as beautiful.

Claymark | Garrison

Garrison® is the most advanced weatherboard system in New Zealand. Using the latest technology and environmentally friendly production process with three factory applied barriers of protection that is guaranteed to last a lifetime. Garrison® is a cladding product unique to our company.

WEATHERLINE® | Lysaght

The COLORBOND® steel colour swatches shown have been reproduced to represent actual product colours and finish as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions and limitations of the printing process may affect colour tones and finish.

James Hardie Linea™ Weatherboard Direct Fixed and Cavity

3. LineaTM Weatherboard cladding is finished with a latex paint system. Product purpose and use 1.0 Material Cladding for the Direct Fixed Wall Construction Method: 1.1 LineaTM Weatherboard Direct Fixed Cladding has been assessed as an external wall cladding for buildings within the following scope:

Product Catalogue

WEATHERBOARDS James Hardie Product Catalogue Linea™ PVC Starter Strip A perforated PVC starter strip used to set out the bottom edge of Scyon™ Linea™ weatherboard at the correct angle. Length: 3,000mm Selling Unit: 25 per pack HardieDrive™ Screws 32mm long A class 3 finish self-tapping wing-tipped screw for fastening to 0.8mm to 1.6mm BMT

Linea® weatherboard by James Hardie – Selector

Linea® weatherboard is a top-quality alternative to timber cladding. Made in New Zealand to withstand even the harshest Kiwi conditions, it's very tough – resistant to fire, moisture damage and rot.

THIS IS TO CERTIFY THAT Scyon™ Linea™

Linea weatherboard 4200* 150 16 T&G 120 8.3 2.8 1350 180mm Scyon Linea weatherboard 4200* 180 16 T&G 150 6.7 3.4 1620 Scyon™ Axent™ trim - Refer to current Scyon Axent™ trim manual for sizes. *Length is 4200mm plus 5mm for the tongue and groove (T & G) making the length 4205mm overall.

Linea Weatherboard 4200 x 180 x 16mm | Weatherboard | Fibre

Linea Weatherboard is a bevel-back weatherboard that offers design flexibility in traditional and modern architecture. Suitable for creating striking feature walls, full cladding for new builds and cladding for additions and renovations.

Linea™ Smooth Weatherboard James Hardie – PlastaMasta Gold

Innovative and durable, Linea weatherboards are resistant to shrinking, swelling and cracking and will hold paint longer than wood. Featuring the distinctive charm of a deep shadow weatherboard without the maintenance of timber, the unmatched thickness for fibre cement weatherboards of 16mm which also enable handy tongue and groove short ends

CodeMark - Giving James Hardie Linea® Weatherboard – EBOSS

Linea Weatherboard is also appraised by BRANZ, and carries a 25 year product warranty, one of the longest for any weatherboard on the New Zealand market. James Hardie provides CAD files, technical specification manuals, interactive installation details, and comprehensive on-site training so designers can specify with confidence.

Weatherboard Fibre Cement - ADX Architectural - James Hardie

Explore the James Hardie range of Weatherboard Fibre Cement products & accessories to achieve clean lines and texture on exterior applications.

Dwelling Well

Exterior Cladding. Weatherboard with a slimline box corner James Hardie – Linea Weatherboards. The advanced composite structure of Linea Weatherboard also means the boards are resistant to fire, moisture damage and rot, so you can rest assured your home will be tough, as well as beautiful.

Claymark | Garrison

Garrison® is the most advanced weatherboard system in New Zealand. Using the latest technology and environmentally friendly production process with three factory applied barriers of protection that is guaranteed to last a lifetime. Garrison® is a cladding product unique to our company.

Linea® weatherboard by James Hardie – Selector

Linea® weatherboard is a top-quality alternative to timber cladding. Made in New Zealand to withstand even the harshest Kiwi conditions, it's very tough – resistant to fire, moisture damage and rot.

THIS IS TO CERTIFY THAT Scyon™ Linea™

Linea weatherboard 4200* 150 16 T&G 120 8.3 2.8 1350 180mm Scyon Linea weatherboard 4200* 180 16 T&G 150 6.7 3.4 1620 Scyon™ Axent™ trim - Refer to current Scyon Axent™ trim manual for sizes. *Length is 4200mm plus 5mm for the tongue and groove (T & G) making the length 4205mm overall.

Scyon Linea weatherboard - Design Content

Highly durable, Scyon Linea weatherboard is the weatherboard that weathers well. Scyon Linea weatherboard can be used in residential applications wherever a classic, contemporary or composite design is required, including external walls in composite construction, upper-storey and ground-level extensions, and internal feature walls.

Linea Weatherboard 4200 x 180 x 16mm | Weatherboard | Fibre

Linea Weatherboard is a bevel-back weatherboard that offers design flexibility in traditional and modern architecture. Suitable for creating striking feature walls, full cladding for new builds and cladding for additions and renovations.

Linea™ Smooth Weatherboard James Hardie – PlastaMasta Gold

Innovative and durable, Linea weatherboards are resistant to shrinking, swelling and cracking and will hold paint longer than wood. Featuring the distinctive charm of a deep shadow weatherboard without the maintenance of timber, the unmatched thickness for fibre cement weatherboards of 16mm which also enable handy tongue and groove short ends

James Hardie Linea Oblique Weatherboard - Paneling | Mitre 10™

Linea Oblique Weatherboard is a modern, rusticated weatherboard profile that can be installed both horizontally and vertically. It is available in 200 and 300mm widths allowing you to create both modern and traditional designs, or try combining the two widths to create an architectural look that is truly unique. An external wall cladding for residential and light commercial builds.

linea cladding calculator - WPC Decking

Linea Weatherboard - James Hardie A deep shadow weatherboard for contemporary homes. Linea Weatherboard. Available in 80mm and 50mm widths.

Weatherboard Fibre Cement - ADX Architectural - James Hardie

Explore the James Hardie range of Weatherboard Fibre Cement products & accessories to achieve clean lines and texture on exterior applications.

James Hardie Fire and Acoustic Rated Walls – EBOSS

Linea Weatherboard is resistant to the damage from moisture and rotting when installed and maintained correctly Boards have a 25 year product warranty 30, 60 and 90 minute fire resistance ratings can be achieved when installed as per the current James Hardie Fire and Acoustic Design Manual

Dwelling Well

Exterior Cladding. Weatherboard with a slimline box corner James Hardie – Linea Weatherboards. The advanced composite structure of Linea Weatherboard also means the boards are resistant to fire, moisture damage and rot, so you can rest assured your home will be tough, as well as beautiful.